Link Electricals (India)
Chandni Chowk, Delhi
GST No. 07AARPS4911R1ZR
08046048932 84% Response Rate
Send E-mail
- Home
- »
- Products & Services
- »
- Lightning Arrester Manufacturer India
| Minimum Order Quantity | 10 Piece |
| Phase | Single Phase |
| Country of Origin | Made in India |
| Rod Dia | 12 mm |
| Length | 1000 mm |
| Base Plate Thickness | 4 mm |
| Material | Copper |
Our Copper Cladded Lightning Arrester is a kind of device, which is ideal for protecting electrical equipment. Our offered range is designed to protect any damage caused due to over voltage transients caused due to lightening or internal event. Thus, our range is widely used in power transmission and distribution system. For effective working, the arrester should have low impulse ratio so that the offered range bypassed to the ground instead of passing through any equipment.
Rod Dia: 12 to 25 mm
Price Range: Rs. 750 to Rs. 2500 per Piece
| Minimum Order Quantity | 10 Piece |
| Type | Conventional Type |
| Phase | Single Phase |
| Arrester Length | 1 m |
| Country of Origin | Made in India |
| Radius of Protection | 45 degree |
| Outer Dia | 25 mm |
| Material | Copper |
It is a kind of conductive metal device and gets mounted at the highest point of the roof. This is done for protecting the appliances from the lightning strike. Basically, the presented range is designed for connecting with earth electrode with the aid of conducting wire or strip. The construction of Standard Lightning Arrester is done while choosing good quality copper having pointed edges on one side and gets connected to the copper wire from others.
Features:
Benefits:
| Type | Type 2 |
| Phase | Single Phase |
| Highest Voltage Potection | 600V |
| Max Discharge Current | 5 kA |
| Usage/Application | Electrical, Chimney, Commercial, Residential, Tower etc |
| Lighting Protection Material | Copper |
*Your information is safe with us.
| Rated Voltage | 11 kV |
| Arrester Length | 750 mm |
| Rated current | 10 kA |
| Material | Polymeric |
| Arrester Type | Intermediate Type |
| Mechanical Strength | 23 kN/m2 |
| Diameter | 15 mm |
| Minimum Order Quantity | 10 Piece |
| Phase | Single Phase |
| Operating Temperature Range | -20 to 80 DegreeC |
| Country of Origin | Made in India |
| Material | Copper |
| Rod Dia | 12 mm |
| Length | 900 mm |
| Spike Dimension | 12 x 3 mm |
| Spike Length | 120 mm |
| Base Plate Dimension | 50 x 65 mm |
| Base Plate Thickness | 6 mm |
| Operating Temperature Range | -20 to 85 DegreeC |
| Phase | Single Phase |
| No.of Poles | Single Pole |
| Highest Voltage Potection | 1000V |
| Certification | Tested at CPRI for highest current rating available in india |
| Country of Origin | Made in India |
| Surface Treatment | Polished |
| Material | Stainless Steel |
| Polarities | Dual |
| Compatibity | Works in all atmospheric conditions |
| Standard | Developed as per NFC 17-102 |
| Usage | Commercial, Residential, Chimney, Tower, Open Ground |
Features:
*Your information is safe with us.
| Type | Type 3 |
| Phase | Three Phase |
| Highest Voltage Potection | 600V |
| Brand | Potencial |
| Max Discharge Current | 100 kA |
| Material | Stainless Steel |
| Country of Origin | Made in India |
| Phase | Single Phase |
| Highest Voltage Potection | 240V |
| Brand | Bolt |
| Application | Commercial, Residential, Chimney, Tower, Open Ground |
| Type | Type 3 |
| Material | Stainless Steel |
| Standard | Developed as per NFC 17-102 |